Product ImageProduct OverviewKey FeaturesSpecificationsMechanical DrawingOrdering InformationDownload
KPS3224A
1U Rack Mount Serial Server
Product Overview

Kyland KPS3224A Serial Server is an 1U rack-mount industrial serial server. It is mainly used to connect serial port equipment to Ethernet, the serial port data can be read through the network and the serial port device can be remotely controlled. Kyland KPS Serial Server not only supports TCP client, TCP server and UDP network communication modes, but also supports transparent transmission and Modbus RTU data transmission protocol.

Kyland KPS3224A Serial Server support 8 RS232 serial port and 16 RS485 or 8 RS422 serial port. The product provides 120 Ω switchable terminal resistance to reduce signal reflection and effectively improve the stability and reliability of RS485/RS422 serial port communication.

Key Features
Specifications
Technical Specifications
Ethernet Interface Ethernet port number: 2
Speed: 10/100 Mbps, Auto MDI/MDIX
Connector: RJ45
Serial Interface Serial port number: 8×RS232, 16×RS485 or 8×RS422(Configure by software)
Connector: 2-pin terminal block
Isolation Protection: 2kv(build-in)
DIP switch: enable/disable the 120 Ω terminal resistor of RS485
Serial Communication Parameters Operation mode: TCP Client, TCP Server, UDP
Baud rate: 4800bps~115200bps
Data bit: 5、6、7、8
Stop bit: 1、2
Check digits: None、Even、Odd
Switch Support dual network port bridging cascading, dual network port independent can be configured with different network segment IP.
Route Support static routing
Security function SSH, SSL
MAC address binding
User classification
Equipment management Web management(HTTP/HTTPS)
KyCMT(device search, IP address configuration and other functions)
ICMP
SNMP v2c SNMP trap
ARP
DNS
DHCP Client
Equipment maintenance function Upgrading through web
FTP, TFTP and syslog
SMTP mail alert
Equipment alarm indicator
Automatic reconnection after disconnection
Clock characteristics NTP client
LED indicators System: Power, Run
Alarm LED: ALARM
Reset LED: Reset
Tx/Rx LED: Serial port transmit /Receive data
Port LED: Link/Act
Physical Characteristic Enclosure: SECC electrolytic galvanized steel sheet
Dimension(mm): 483×200×44
Protection Class: IP40
Cooling: Natural cooling, fanless
Installation method: DIN rail type and wall-mounted type
Environmental feature Operating temperature: -40℃~75℃
Storage temperature: -40℃~85℃
Ambient Relative humidity: 5~95%, no condensation Heat dissipation mode: natural cooling
MTBF: >30000h
Warranty: 5 Years
Power requirements Input voltage: 220VAC dual power optional
Power Consumption: <8W
Access terminal: 5-pin 5.08 mm-spacing plug-in terminal block
Reverse protection: Support
Overload protection: Support
Power failure alarm: Support
Industrial standards EMI
FCC CFR47 Part 15,
EN55022/CISPR22,ClassA
EMS
IEC61000-4-2(ESD) ±6kV(contact),±8kV(air)
IEC61000-4-3(RS) 10V/m(80MHz~2GHz)
IEC61000-4-4(EFT) Power Port:±2kV;Data Port:±1kV
IEC61000-4-5(Surge) Power Port:±1kV/DM,±2kV/CM; Data Port:±1kV
IEC61000-4-6(CS) 10V(150kHz~80MHz)
IEC61000-4-8 100A/m(cont.),1000A/m(1s-3s)
IEC61000-4-9 1000A/m
IEC61000-4-10 100A/m
IEC61000-4-12 2kV/CM,1kV/DM
IEC61000-4-16 30V(cont.),300V(1s)
Machinery
IEC60068-2-6(vibration)
IEC60068-2-27(shock)
IEC60068-2-32(free fall)
Mechanical Drawing

Ordering Information

Models

Ethernet Ports

RS232

RS485/

RS422

Power

Dimension(mm)

KPS3224A-2T24D-232/485/422-HV

2 8 16/8 85~265VAC

483×200×44

KPS3224A-2T24D-232/485/422-HV-HV

2 8 16/8

85~265VAC(Dual)

483×200×44
Download