The KOM300M is a ultra low power consumption Green industrial media convertor, its full load power consumption is as low as 2.7 watts. The KOM300M supports 1 100Base-FX fiber port and 2 10/100Base-T(X) copper ports. The KOM300M provides 9-36VDC or 18-72VDC redundant power inputs, supports DIN-Rail mounting or Panel mounting, and IP40 protection class. It supports Telnet, WEB, Kyvision management.
Green Ethernet solution with ultra low power consumption design, its full load power consumption is as low as 2.7 watts
1 100Base-FX port and 2 10/100Base-T(X) RJ45 ports
Supports remote monitoring of device status
Redundant power inputs with wide voltage range
IP40 protection class
CE, FCC,UL508, Class I Div 2 certificates
| Software Functions | Management and maintenance | Supports Telnet and Web management methods Supports SNMPv1/v2c/V3 and Kyvision centralized management Supports FTP/TFTP software upgrade Supports port alarm Supports LLDP |
| Product Specifications | ||
| Standard | IEEE 802.3i(10Base-T) IEEE 802.3u(100Base-TX and 100Base-FX) |
|
| Switch Properties | MAC Table: 2K Packet Buffer: 1Mbit Packet Forwarding Rate: 0.8Mpps Switching Delay:<5μs |
|
| Interface | Fast Ethernet Ports: 100Base-FX, SM/MM port, FC/SC/ST connector 10/100Base-T(X) RJ45 port |
|
| LED | Indicators in the front panel Running LED: Run Power LED: PWR1, PWR2 Interface LED: Link/ACT, Speed (RJ45 Ports); Link/ACT(Fiber Ports) |
|
| Power Requirements | Power Input: 24-48VDC(18-72VDC) 12-24VDC(9-36VDC) Power Terminal: 5-pin 5.08mm-spacing plug-in terminal block Power Consumption<2.7w Overload Protection: Support ReverseConnection Protection: Support Redundancy Protection: Support |
|
| Physical Characteristics | Housing: Metal Heat Dissipation Mode: Natural cooling, without fans Protection Class: IP40 Dimensions: 30mm×115mm×91.5mm (W×H×D) Weight: 0.46kg Mounting: DIN-Rail or Panel mounting |
|
| Environmental Limits | Operating Temperature: -40°C to +85°C Storage Temperature: -40°C to +85°C Ambient Relative Humidity: 5 - 95% (non-condensing) |
|
| Quality Assurance | MTBF: 457,840 hrs Warranty: 5 years |
|
| Approvals | CE(EMC), FCC: Models with L2:24-48VDC. UL508, Class I Div 2: Models with L2:24-48VDC. |
|
| Industry Standard | EMI: FCC CFR47 Part 15,EN55022/CISPR22,Class A EMS: IEC61000-4-2(ESD) ±8kV(contact),±15kV(air) IEC61000-4-3(RS) 10V/m(80MHz-2GHz) IEC61000-4-4(EFT) Power Port:±4kV;Data Port:±2kV IEC61000-4-5(Surge) Power Port:±2kV/DM,±4kV/CM;Data Port:±2kV IEC61000-4-6(CS) 3V(10kHz-150kHz);10V(150kHz-80MHz) Mechanical standards: IEC60068-2-6 (Vibration), IEC60068-2-27 (Shock), IEC60068-2-32 (Free Fall) |
| KOM300M-Ports-Connector-PS1-PS2 | |
| Ports | |
| 1S2T | 1 × 100Base-FX single mode port, 2 × 10/100Base-T(X) RJ45 ports |
| 1M2T | 1 × 100Base-FX multi mode port, 2 × 10/100Base-T(X) RJ45 ports |
| Connector | 100M fiber port specifications |
| SC05 | SC connector, multi-mode, 1310nm, 5km |
| ST05 | ST connector, multi-mode, 1310nm, 5km |
| FC05 | FC connector, multi-mode, 1310nm, 5km |
| SC40 | SC connector, single-mode, 1310nm, 40km |
| ST40 | ST connector, single-mode, 1310nm, 40km |
| FC40 | FC connector, single-mode, 1310nm, 40km |
| SC60 | SC connector, single-mode, 1310nm, 60km |
| SC80 | SC connector, single-mode, 1550nm, 80km |
| PS | |
| L2-L2 | 24-48VDC(18-72VDC), redundant power inputs |
| L5-L5 | 12-24VDC( 9-36VDC), redundant power inputs |
| Accessories | |
| DT-BGAZ-01 | Panel for panel mounting |
| DT-FCZ-RJ45-01 | Dustproof cover for RJ45 port |
Kyland-KOM300M-Datasheet-EN.pdf KOM300M Industrial Media Converter Hardware Installation Manual_V1.0.pdf
Image-KOM300M-1500x1251px.zip
