Product ImageProduct OverviewKey FeaturesSpecificationsMechanical DrawingOrdering InformationCase StudyDownload
SICOM3024
24+4G Port Layer 2 Managed Rack Mountable Switches
Product Overview

SICOM3024 is a layer 2 managed industrial Ethernet switch designed to operate reliably in electrically harsh and climatically demanding utility substation and industrial environments. SICOM3024 supports up to 4 gigabit SFP ports, 16 fast Ethernet RJ45 ports and 8 fast Ethernet fiber/copper ports, meets the IEC61850 and IEEE1613 standards. SICOM3024 is a 19-inch 1U rack mountable device and allows front and rear panel mounting. It supports many Layer 2 software features such as port, VLAN, multicast, QoS, fast redundant ring. It supports Console, Telnet, Web management and network management software based on SNMP. At present, the product is widely used in the power industry, railway industry, intelligent transportation industry and automatic control field.

Key Features

supports max 4 gigabit SFP ports, 16 fast Ethernet RJ45 ports and 8 fast Ethernet fiber/copper ports
Supports DT-Ring , RSTP for network redundancy
Supports the IP/MAC address conflict alarm, power failure alarm, power alarm, port alarm, and ring alarm
Complies with IEC61850-3 and IEEE1613
CE, FCC certification

Specifications
Software functions
Switching Function Supports VLAN and PVLAN.
Supports port aggregation.
Supports flow control.
Support port rate limit
Supports broadcast storm suppression.
Redundancy Protocol Supports DT-Ring, DT-Ring+, and DT-VLAN and the recovery time<50 ms.
Supports STP/RSTP
Multicast Protocol Supports IGMP snooping.
Supports GMRP.
Security Supports IEEE 802.1x. (special firmware)
Supports HTTPS/SSL. (special firmware)
Supports SSH. (special firmware)
Supports RADIUS. (special firmware)
Supports TACACS+.(special firmware)
Supports user grading. (special firmware)
Supports MAC address limit. (special firmware)
Supports port isolate. (special firmware)
Service Quality Management Supports ACL
Supports 802.1p(CoS),DSCP
Supports SP and WRR queuing.
Management & Maintenance Supports Console, Telnet, and Web management methods.
Supports SNMPv1/v2c/v3 and can managed by Kyvision. (special firmware supports v3)
Supports software update and configuration import/ export over FTP.
Supports the IP/MAC address conflict alarm, power failure alarm, power alarm, port alarm, and ring alarm
Supports RMON.
Supports port mirroring.
Supports Syslog. (special firmware)
Supports LLDP.
Supports Link-check.
Supports loop detection. (special firmware)
Supports CRC protection. (special firmware)
IP Address Management Supports DHCP server/snooping/option 82. (Web interface doesn’t support, and special firmware supports snooping and option82)
Clock Management Supports SNTP server/client.
Product Specifications
Standard IEEE 802.3i(10Base-T)
IEEE 802.3u(100Base-TX and 100Base-FX)
IEEE 802.3ab(1000Base-T)
IEEE 802.3z(1000Base-SX/LX)
IEEE 802.3x(flow control)
IEEE 802.1p(priority)
IEEE 802.1Q(VLAN)
IEEE 802.1w(RSTP)
Switch Properties Priority queue: 4
Number of VLANs: 256
VLAN ID: 1–4093
Number of multicast groups: 256
MAC table: 8K
Packet buffer: 2Mbit
Packet forwarding rate: 9.5Mpps
Switching delay:<10μs
Interface Gigabit ports: 1000Base-X, SFP port
Fast Ethernet ports:
100Base-FX, single/multi mode, SC/ST/FC connector
10/100Base-T(X), RJ45 port
Console port: RS232,RJ45
Alarm contact: 3-pin 3.81mm-spacing plug-in terminal block, 250 VAC/220 VDC Max, 2 A Max, 60 W Max
LED LED on front panel
Running LED: Run
Alarm LED: Alarm
Power LED: PWR1, PWR2
Port LED: Link/ACT
Port speed LED: Speed
LED on rear panel
Port LED: Link/ACT
Port speed LED: Speed
Power Requirements Power input:
24VDC(18-36VDC),
48VDC(36-72VDC),
100-240VAC,50/60Hz;110-220VDC (85-264VAC/77-300VDC)
Power terminal:
5-pin 5.08 mm-spacing plug-in terminal block
Power consumption:<21.6w
Overload protection: Support
Reverse connection protection: Support
Redundancy protection: Support
Physical Characteristics Housing: Metal
Cooling: Natural cooling, fanless
Protection Class: IP40
Dimensions(WxHxD): 482.6mm×44mm×245mm (19×1.73×9.64 in.)
Weight: 3Kg (6.61 pound)
Mounting: 19 inch 1U rack mounting
Environmental Limits Operating temperature: -40°C to + 85°C (-40°F to 185°F)
Storage temperature: -40°C to + 85°C (-40°F to 185°F)
Ambient Relative Humidity: 5% - 95% (non-condensing)
Quality Assurance MTBF: 318,296 hrs
Warranty: 5 years
Approvals CE: Models with power supply of HV:100-240VAC,50/60Hz;110-220VDC
FCC: Models with power supply of HV:100-240VAC,50/60Hz;110-220VDC
Industry Standard EMI:
FCC CFR47 Part 15,EN55022/CISPR22,Class A

EMS:
IEC61000-4-2(ESD) ±8kV(contact),±15kV(air)
IEC61000-4-3(RS) 10V/m(80MHz-2GHz)
IEC61000-4-4(EFT) Power Port:±4kV;Data Port:±2kV
IEC61000-4-5(Surge) Power Port:±2kV/DM,±4kV/CM;Data Port:±2kV
IEC61000-4-6(CS) 3V(10kHz-150kHz);10V(150kHz-80MHz)
IEC61000-4-8(power frequency magnetic field) 100A/m(cont.),1000A/m(1s-3s)
IEC61000-4-9(pulsed magnetic field) 1000A/m
IEC61000-4-10(damped oscillation) 100A/m
IEC61000-4-12(oscillatory wave) 2.5kV/CM,1kV/DM
IEC61000-4-16(common mode conduction) 30V(cont.),300V(1s)

Machinery:
IEC60068-2-6 (vibration),
IEC60068-2-27 (shock),
IEC60068-2-32 (free fall)
Mechanical Drawing

Ordering Information
SICOM3024-Ports-Connector-PS1-PS2
Ports  
4GX8S16T 4x1000Base-X SFP port;8x100Base-FX single-mode fiber port;16x10/100Base-T(X) RJ45 port
4GX8M16T 4x1000Base-X SFP port;8x100Base-FX multi-mode fiber port;16x10/100Base-T(X) RJ45 port
4GX6S18T 4x1000Base-X SFP port;6x100Base-FX single-mode fiber port;18x10/100Base-T(X) RJ45 port
4GX6M18T 4x1000Base-X SFP port;6x100Base-FX multi-mode fiber port;18x10/100Base-T(X) RJ45 port
4GX4S20T 4x1000Base-X SFP port;4x100Base-FX single-mode fiber port;20x10/100Base-T(X) RJ45 port
4GX4M20T 4x1000Base-X SFP port;4x100Base-FX multi-mode fiber port;20x10/100Base-T(X) RJ45 port
4GX2S22T 4x1000Base-X SFP port;2x100Base-FX single-mode fiber port;22x10/100Base-T(X) RJ45 port
4GX2M22T 4x1000Base-X SFP port;2x100Base-FX multi-mode fiber port;22x10/100Base-T(X) RJ45 port
4GX24T 4x1000Base-X SFP port;24x10/100Base-T(X) RJ45 port
4GX16T 4x1000Base-X SFP port;16x10/100Base-T(X) RJ45 port
8S16T 8x100Base-FX single-mode fiber port;16x10/100Base-T(X) RJ45 port
8M16T 8x100Base-FX multi-mode fiber port;16x10/100Base-T(X) RJ45 port
6S18T 6x100Base-FX single-mode fiber port;18x10/100Base-T(X) RJ45 port
6M18T 6x100Base-FX multi-mode fiber port;18x10/100Base-T(X) RJ45 port
4S20T 4x100Base-FX single-mode fiber port;20x10/100Base-T(X) RJ45 port
4M20T 4x100Base-FX multi-mode fiber port;20x10/100Base-T(X) RJ45 port
2S22T 2x100Base-FX single-mode fiber port;22x10/100Base-T(X) RJ45 port
2M22T 2x100Base-FX multi-mode fiber port;22x10/100Base-T(X) RJ45 port
24T 24x10/100Base-T(X) RJ45 port
4S24T 4x100Base-FX single-mode fiber port;24x10/100Base-T(X) RJ45 port
4M24T 4x100Base-FX multi-mode fiber port;24x10/100Base-T(X) RJ45 port
2S24T 2x100Base-FX single-mode fiber port;24x10/100Base-T(X) RJ45 port
2M24T 2x100Base-FX multi-mode fiber port;24x10/100Base-T(X) RJ45 port
Connector 100M fiber port specifications
SC05 SC connector, multi-mode, 1310nm, 5km
ST05 ST connector, multi-mode, 1310nm, 5km
FC05 FC connector, multi-mode, 1310nm, 5km
SC40 SC connector, single-mode, 1310nm, 40km
ST40 ST connector, single-mode, 1310nm, 40km
FC40 FC connector, single-mode, 1310nm, 40km
SC60 SC connector, single-mode, 1310nm, 60km
SC80 SC connector, single-mode, 1550nm, 80km
None No 100M fiber port
PS1 Power input 1
HV 100-240VAC,50/60Hz;110-220VDC(85-264VAC/77-300VDC)
L1 48VDC(36-72VDC)
L3 24VDC(18-36VDC)
PS2 Power input 2
HV 100-240VAC,50/60Hz;110-220VDC(85-264VAC/77-300VDC)
L1 48VDC(36-72VDC)
L3 24VDC(18-36VDC)
None no redundant power supply
   
PO (Demo)  
SICOM3024-4GX8M16T-ST05-L3-L3 4x1000Base-X SFP port;8x100Base-FX multi-mode fiber port, ST connector, 1310nm, 5km;16x10/100Base-T(X) RJ45 port, 24VDC(18-36VDC), Dual power supply
SICOM3024-4GX16T-HV 4x1000Base-X SFP port;16x10/100Base-T(X) RJ45 port, 100-240VAC,50/60Hz;110-220VDC(85-264VAC/77-300VDC), single power supply

 

Accessory Model Description
Gigabit SFP module See the selection table of industrial gigabit SFP module
DT-FCZ-RJ45-01 Single-port RJ45 dust plug

 

Case Study
Download