• 发布时间: 2015-03-25 17:23:45
  • 点击量: 0
  • Overview
  • Specs
  • Ordering

SICOM3009BA serial is designed for use in explosive atmospheres environment, low consumption, without housing. Comply with intrinsic safety, have advanced insulation performance, damp proofing, support fiber transmitting and forwarding, multiple redundant topology, remote monitoring, etc. Apply to explosive atmospheres, high dust, corrosive condition, such as coal mine, chemical factory, oil field and so on.

Key Features
3 100Base-FX ports, 6 10/100Base-T(X) ports with RJ45 connecters.
Full load power consumption is as low as 3.9W.
Comply with IEC60079-11(GB3836.4) of explosive atmospheres.
Dry contact for warning signal,support NO and NC.
Support one key recovery
Embedded switch without housing

Software Functions

SwitchingSupport VLAN,PVLAN
Support port trunking
Support port flow control
Support port speed limit
Support broadcast storm control
RedundancySupport DT-Ring,DT-Ring+, DT-VLAN with the recovery time<50ms
Support STP/RSTP
MulticastSupport IGMP Snooping
Support static multicast
Network SecuritySupport SSH
Support TACACS+
Service QualitySupport SP,WRR queue scheduling
Management & MaintenanceSupport Console, Telnet, WEB management methods
Support SNMPv1/v2c/v3, Kyvision centralized management
Support software upgrade by FTP
Support power, port and ring alarm
Support RMON
Support port mirroring
Support LLDP
Support Link-check
Clock ManagementSupport SNTP Client

Technical Specifications

StandardIEEE 802.3i(10Base-T)
IEEE 802.3u (100Base-T and 100Base-FX)
IEEE 802.3x(flow control)
IEEE 802.1p(Class of Service)
IEEE 802.1D(STP)
IEEE 802.1w(RSTP)
Switch PropertiesPriority Queues: 4
Number of VLANs: 256
VLAN ID: 1–4093
Number of Multicast Groups: 256
MAC Table: 8K
Packet Buffer: 1Mbit
Packet Forwarding Rate: 5.4Mpps
Switching Delay:<5μs
InterfaceFast Ethernet Ports:
100Base-FX, SM/MM, SC/ST/FC connector
10/100Base-T(X), RJ45 port
Console Port:
RS232,RJ45 connector
Alarm Contact:
2 pins used for alarm,input-mode,together with power input pins, 6-pin 5.08mm-spacing plug-in terminal block
LEDLED on Front Panel
Non-housing version support LED interface for user,Dimensions refer to hardware manual
ButtonReset: system reset
Default: system recover default configuration
Power RequirementsPower Input: 3.3-5VDC(3-5.5VDC)
Power Terminal:
6 pin 5.08mm spacing plug-in termianl block
Power Consumption:<3.9W, 2.06W in idle
Overload Protection: Support
Inverse Protection: Support
Redundancy Protection: Support
Physical CharacteristicsDimension: 130mm×35mm×107mm(W×H×D)
Weights: 0.3kg
Mounting: Embedded mounting
Environmental LimitsOperating Temperature: -40°C to +75°C
Storage Temperature: -40°C to +85°C
Ambient Relative Humidity: 5-95%RH.
Quality AssuranceMTBF: 376,919 hrs
Warranty: 5 years

Ordering Information

ECNon-housing and Conformal Coating
3S6T 3x100Base-FX, single mode fiber port; 6x10/100Base-T(X) RJ45 ports
3M6T 3x100Base-FX, multi mode fiber port; 6x10/100Base-T(X) RJ45 ports
2S6T 2x100Base-FX, single mode fiber port; 6x10/100Base-T(X) RJ45 ports
2M6T 2x100Base-FX, multi mode fiber port; 6x10/100Base-T(X) RJ45 ports
Connector100M fiber port specifications
SC05 SC connector, multi-mode, 1310nm, 5km
ST05 ST connector, multi-mode, 1310nm, 5km
FC05 FC connector, multi-mode, 1310nm, 5km
SC40 SC connector, single-mode, 1310nm, 40km
ST40 ST connector, single-mode, 1310nm, 40km
FC40 FC connector, single-mode, 1310nm, 40km
SC60 SC connector, single-mode, 1310nm, 60km
SC80 SC connector, single-mode, 1550nm, 80km
L9-L93-5.5VDC(3-5.5VDC), Redundant Power Inputs

DT-FCZ-RJ45-01 Dustproof cover for RJ45 port