• 发布时间: 2015-04-16 22:09:33
  • 点击量: 0
  • Overview
  • Specs
  • Ordering

KIEN1005S series are Kyland produced unmanaged 5-port PoE switches, providing 1 fast Ethernet fiber/RJ45 optional port and 4 10/100Base-TX PoE ports compliant with IEEE802.3af. While transmitting data over the cable, each PoE port can output 15.4 watts to PoE terminals directly, eliminating the need for additional wiring. KIEN1005S supports wide operating temperature range from -40°C to 85°C, metal housing with IP40 protection class and redundant power inputs, becoming an economical and harsh-environment-resistant solution for the ITS, video surveillance and other automation applications.

Key Features
1 Fast Ethernet fiber/RJ45 optional port and 4 10/100Base-TX PoE ports compliant with 802.3af
Support PD detection and PD classification
Operating temperature is -40°C to 85°C
IP40 protection class

Technical Specification

StandardIEEE 802.3i(10Base-T)
IEEE 802.3u(100Base-TX and 100Base-FX)
IEEE802.3af (PoE)
Switch PropertiesMAC Table: 2K
Packet Buffer: 1Mbit
Packet Forwarding Rate: 0.8Mpps
Switching Delay:<10μs
InterfaceFast Ethernet Port:
100Base-FX, SM/MM, SC/ST/FC connector
10/100Base-T(X), RJ45port
802.3af PoE Port:
Each PoE port provides max 15.4W feed power
V+ for pin 1, 2 and V- for pin 3, 6 (End-Span PSE)
LEDLEDs on Front Panel:
Interface LED:Link/ACT
PoE Status LED: POE
Power RequirementsPower Input: 48VDC (45-57VDC)
Power Terminal:
5-pin 5.08mm-spacing plug-in terminal block
Power Consumption:<3W (no PD), <65W (full PD)
PoE overload protection: Support
Reverse protection: Support
Redundancy protection: Support
Physical CharacteristicsHousing: Metal
Cooling: Natural convection, fanless
Protection Class: IP40
30mm×115mm×91.5mm (W×H×D)
Weight: 0.46Kg
Mounting: DIN-Rail or Panel Mounting
Environmental LimitsOperating Temperature: -40°C to +85°C
Storage Temperature: -40°C to +85°C
Ambient Relative Humidity: 5-95% (non-condensing)
Quality AssuranceMTBF: 338,100 hrs
Warranty: 5 years
Industry StandardEMI:
FCC CFR47 Part 15,EN55022/CISPR22,Class A
IEC61000-4-2(ESD) ±6KV(contact):±8KV(air)
IEC61000-4-3(RS) 10V/m(80MHz– 2GHz)
IEC61000-4-4(EFT) Power Port:±2KV
IEC61000-4-5(Surge) Power Port:±1KV/DM, ±2KV/CM;
IEC61000-4-6(CS) 10V(150kHZ–80MHz)
IEC60068-2-27 (Vibration)
IEC60068-2-32 (Shock)
IEC60068-2-6 (Free Fall)

Ordering Information

1S4P1x100Base-FX, single mode fiber ports; 4x10/100Base-T(X) RJ45 PoE ports
1M4P1x100Base-FX, multi mode fiber ports; 4x10/100Base-T(X) RJ45 PoE ports
1T4P1 10/100Base-T(X) RJ45 port;4 10/100Base-T(X) RJ45 PoE ports
Connector100M fiber port specifications
SC05 SC connector, multi-mode, 1310nm, 5km
ST05 ST connector, multi-mode, 1310nm, 5km
FC05FC connector, multi-mode, 1310nm, 5km
SC40 SC connector, single-mode, 1310nm, 40km
ST40 ST connector, single-mode, 1310nm, 40km
FC40FC connector, single-mode, 1310nm, 40km
SC60 SC connector, single-mode, 1310nm, 60km
SC80 SC connector, single-mode, 1550nm, 80km
NoneNo 100M fiber port
L10-L1048VDC (45-57VDC), redundant power inputs

DT-BGAZ-01Panel for panel mounting 
DT-FCZ-RJ45-01 Dustproof cover for RJ45 port