SICOM3016BA serial are switches with low consumption, high integration density, comply with explosive atmospheres standard. Which have advanced insulation performance,damp proofing and support multiple redundant protocol, auto topology,remote monitoring ,link check, etc., Excellently apply to explosive atmospheres such as factory automation,coal mine , chemical factory and so on.
4 Gigabit SFP slots, 6 Fast Ethernet fiber/RJ45 optional ports and 6 100Base-FX ports
Full load power consumption is as low as 10.6 W
Comply with explosive atmospheres standard IEC60079-11(GB3836.4)
Support Panel or Embedded Mounting
| Software Features | |
| Switching | Support VLAN,PVLAN Support port trunking Support port flow control Support port speed limit Support broadcast storm control |
| Redundancy | Support DT-Ring, DT-Ring+, DT-VLAN with the recovery time<50ms Support STP/RSTP |
| Multicast | Support IGMP Snooping Support GMRP Support static multicast |
| Service Quality | Support SP, WRR queue scheduling Support ACL |
| Management & Maintenance | Support Console, Telnet, WEB management methods Support SNMPv1/v2c, Kyvision centralized management Support software upgrade by FTP Support IP/MAC conflict, power, port and ring alarm Support RMON Support port mirroring Support LLDP Support Link-check |
| Clock Management | Support SNTP Client |
| Technical specifications | |
| Standard | IEEE 802.3i(10Base-T) IEEE 802.3u(100Base-T and 100Base-FX) IEEE802.3z(1000Base-X) IEEE 802.3x(flow control) IEEE 802.1p(Class of Service) IEEE 802.1Q(VLAN) IEEE 802.1D(STP) IEEE 802.1w(RSTP) |
| Switch Properties | Priority Queues: 4 Number of VLANs: 256 VLAN ID: 1–4093 Number of Multicast Groups: 256 MAC Table: 8K Packet Buffer: 2Mbit Packet Forwarding Rate: 7.7Mpps Switching Delay:<10μs |
| Interface | Gigabit Port: 1000Base-X, SFP slot Fast Ethernet Port: 100Base-FX, SM/MM, SC/ST/FC connector 10/100Base-T(X), RJ45 port Console Port: RS232,RJ45 connector Debug Port: 10/100Base-T(X), RJ45 port Alarm contact: 2 pins used for alarm,input-mode,together with power input pins, 6-pin 5.08mm-spacing plug-in terminal block |
| LED | Power LED: PWR Running LED: Run Alarm LED: Alarm Interface LED: Link/ACT, Speed (RJ45 port); Link/ACT(Fiber port) Non-housing version support LED connector for users. |
| Power Requirements | Power Input: 12VDC(9-18VDC) 5VDC(4.5-5.5VDC) Power Terminal: 6-pin 5.08mm-spacing plug-in terminal block Power Consumption:<10.6w Overload Protection: Support Reverse Protection: Support Redundancy protection: Support |
| Physical Characteristics | Housing: Metal,fanless Cooling: Natural convection, fanless Protection Class: IP40 Dimension: 284mm×44mm×140mm (W×H×D) 235mm×30mm×130mm(non-housing) (W×H×D) Weight: 1.5Kg, 0.5Kg(non-housing) Mounting: Panel Mounting |
| Environmental Limits | Operating Temperature: -40°C to +75°C Storage Temperature: -40°C to +85°C Ambient Relative Humidity: 5-95%RH |
| Quality Assurance | MTBF: 329032 hours Warranty: 5 years |
| Industry Standard | EMI: FCC CFR47 Part 15,EN55022/CISPR22,Class A EMS: IEC61000-4-2(ESD) ±8kV(contact),±15kV(air) IEC61000-4-3(RS) 10V/m(80MHz–2GHz) IEC61000-4-4(EFT) Power Port:±4kV;Data Port:±2kV IEC61000-4-5(Surge) Power Port:±2kV/DM,±4kV/CM;Data Port:±2kV IEC61000-4-6(CS) 3V(10kHz–150kHz);10V(150kHz–80MHz) Machinery: IEC60068-2-6(vibration) IEC60068-2-27(shock) IEC60068-2-32(free-fall) General Industrial: IEC61000-6-2 IEC61000-6-4 Explosive atmospheres standard: IEC60079-0(GB/T3836.1), IEC60079-1(GB/T3836.2), IEC60079-7(GB/T3836.3), IEC60079-11(GB/T3836.4) |
| SICOM3016BA-EC-Ports-Connector-PS1-PS2 | |
| SICOM3016BA-C-Ports-Connector-PS1-PS2 | |
| EC | Non-housing and Conformal Coating |
| C | Conformal Coating |
| Ports | |
| 4GX12S | 4x1000Base-X, SFP slots; 12x100Base-FX, single mode fiber ports |
| 4GX12M | 4x1000Base-X, SFP slots; 12x100Base-FX, multi mode fiber ports |
| 4GX6S6T | 4x1000Base-X, SFP slots; 6x100Base-FX, single mode fiber ports; 6x10/100Base-T(X) RJ45 ports |
| 4GX6M6T | 4x1000Base-X, SFP slots; 12x100Base-FX, multi mode fiber ports; 6x10/100Base-T(X) RJ45 ports |
| 3GX12S | 3x1000Base-X, SFP slots; 12x100Base-FX, single mode fiber ports |
| 3GX12M | 3x1000Base-X, SFP slots; 12x100Base-FX, multi mode fiber ports |
| 3GX6S6T | 3x1000Base-X, SFP slots; 6x100Base-FX, single mode fiber ports; 6x10/100Base-T(X) RJ45 ports |
| 3GX6M6T | 3x1000Base-X, SFP slots; 12x100Base-FX, multi mode fiber ports; 6x10/100Base-T(X) RJ45 ports |
| Connector | 100M fiber port specifications |
| SC05 | SC connector, multi-mode, 1310nm, 5km |
| ST05 | ST connector, multi-mode, 1310nm, 5km |
| FC05 | FC connector, multi-mode, 1310nm, 5km |
| SC40 | SC connector, single-mode, 1310nm, 40km |
| ST40 | ST connector, single-mode, 1310nm, 40km |
| FC40 | FC connector, single-mode, 1310nm, 40km |
| SC60 | SC connector, single-mode, 1310nm, 60km |
| SC80 | SC connector, single-mode, 1550nm, 80km |
| PS1-PS2 | |
| L7-L7 | 5VDC(4.5-5.5VDC), redundant power inputs |
| L6-L6 | 12VDC(9-18VDC), redundant power inputs |
| Accessories | |
| Gigabit SFP module | Please refer to Gigabit SFP module ordering table |
| DT-FCZ-RJ45-01 | Dustproof cover for RJ45 port |
Kyland-SICOM3016BA-Datasheet-EN.pdf SICOM3016BA Industrial Ethernet Switch Hardware Installation Manual_V1.1.pdf SICOM3016B & 3016BA & 3016DH & 5424R & 3024P(V2.2) & 2024M(V1.0) & 3024(V1.0) Series Industrial Ethernet Switches Web Operation Manual_V2.2.pdf
Image-SICOM3016BA-1500x1251px.zip
