KIEN1026 is an entry-level unmanaged industrial Ethernet switch specially designed by KYLAND for industrial applications. It supports up to 24 10/100Base-T(X) and 2 100Base-FX ports, Aluminum IP40 protection class and -40 to 85°C operating temperature. Its highperformance switch engine, solid and closed case, and excellent EMC protection (level 4) make KIEN1026 applicable in all kinds of harsh and dangerous industrial environments.
| Product Specifications | |
| Standard | IEEE 802.3i(10Base-T) IEEE 802.3u(100Base-TX and 100Base-FX) |
| Switch Properties | MAC table: 8K Packet buffer: 4Mbit Packet forwarding rate: 4.2Mpps Switching delay:<10μs |
| Interface | Fast Ethernet ports: 100Base-FX, single/multi mode, SC/ST/FC connector 10/100Base-T(X), RJ45 port |
| LED | LED on front panel Power LED: PWR1, PWR2 Port LED: Link/ACT Port speed LED: Speed LED on rear panel Port LED: Link/ACT Port speed LED: Speed Fiber port LED:A, B |
| Power Requirements | Power input: 24VDC(18-36VDC), 100-240VAC,50/60Hz;110-220VDC (85-264VAC/77-300VDC) Power terminal: 5-pin 5.08 mm-spacing plug-in terminal block Power consumption:<15w Overloadprotection: Support Reverse connection protection: Support Redundancy protection: Support |
| Physical Characteristics | Housing: Metal Cooling: Natural cooling, fanless Protection Class: IP40 Dimensions(WxHxD): 482.6mm×44mm×245mm (19×1.73×9.64 in.) Weight: 2.5Kg (5.51 pound) Mounting: 19 inch 1U rack mounting |
| Environmental Limits | Operating temperature: -40°C to +85°C (-40°F - 185°F) Storage temperature: -40°C to +85°C (-40°F - 185°F) Ambient Relative Humidity: 5%-95% (non-condensing) |
| Quality Assurance | MTBF: 341,336 hrs Warranty: 5 years |
| Approvals | CE: Models with power supply of L3: 24VDC FCC: Models with power supply of L3: 24VDC |
| Industry Standard | EMI: FCC CFR47 Part 15,EN55022/CISPR22,Class A EMS: IEC61000-4-2(ESD) ±6kV(contact),±8kV(air) IEC61000-4-3(RS) 10V/m(80MHz-2GHz);3V/m(2-2.7GHz) IEC61000-4-4(EFT) Power Port:±2kV;Data Port:±2kV IEC61000-4-5(Surge)Power Port:±2kV/DM,±2kV/CM; Data Port:±2kV IEC61000-4-6(CS) 10V(150kHz-80MHz) Machinery: IEC60068-2-6 (vibration), IEC60068-2-27 (shock), IEC60068-2-32 (free fall) |
| KIEN1026-Ports-Connector-PS1-PS2 | |
| Ports | |
| 2S16T | 2x100Base-FX, single mode fiber ports; 16x10/100Base-T(X) RJ45 ports |
| 2M16T | 2x100Base-FX, multi mode fiber ports; 16x10/100Base-T(X) RJ45 ports |
| 2S24T | 2x100Base-FX, single mode fiber ports; 24x10/100Base-T(X) RJ45 ports |
| 2M24T | 2x100Base-FX, multi mode fiber ports; 24x10/100Base-T(X) RJ45 ports |
| 16T | 16x10/100Base-T(X) RJ45 ports |
| 24T | 24x10/100Base-T(X) RJ45 ports |
| Connector | 100M fiber port specifications |
| SC05 | SC connector, multi-mode, 1310nm, 5km |
| ST05 | ST connector, multi-mode, 1310nm, 5km |
| FC05 | FC connector, multi-mode, 1310nm, 5km |
| SC40 | SC connector, single-mode, 1310nm, 40km |
| ST40 | ST connector, single-mode, 1310nm, 40km |
| FC40 | FC connector, single-mode, 1310nm, 40km |
| SC60 | SC connector, single-mode, 1310nm, 60km |
| SC80 | SC connector, single-mode, 1550nm, 80km |
| None | No 100M fiber port |
| PS1 | |
| HV | 100-240VAC,50/60Hz;110-220VDC(85-264VAC/77-300VDC) |
| L3 | 24VDC(18-36VDC) |
| PS2 | |
| HV | 100-240VAC,50/60Hz;110-220VDC(85-264VAC/77-300VDC) |
| L3 | 24VDC(18-36VDC) |
| None | No secondary power supply |
| Accessories | |
| DT-FCZ-RJ45-01 | Dustproof cover for RJ45 port |
Kyland-KIEN1026-Datasheet-EN.pdf 1.12.02.1052-0-KIEN1026 Industrial Ethernet Switch Hardware Installation Manual_V1.1.pdf
Image-KIEN1026-1500x1251px.zip
